Questions And Answers For Dell Server Test Exam
Posted On Sun Jun 15, 2008 By luke_1990 In General Forums And Topics Discussions About Anything Wallpapers Sites Forums
ok this is what i got from my friend on the dell server. just remember as long as you can find the answers for yourself you wil pass the test, my friend didnt pass the test because he relied on cheating so the best way to pass it is to actually look for the answers yourself
1. Which PowerEdge SC1435 BIOS setting must be disabled to allow Non-Uniform Memory Access?
Node Interleaving
------
2. In which section of the system setup of the PowerEdge 840, 860 and, SC1430 would you ensure that the diskette drive is the first boot device?
Boot Sequence
------
3. Which RAID controller is supported in the PowerEdge SC1430?
SAS 5/iR
------
4.Why should you be careful while removing or installing a socket F processor?
(NOT SURE ABOUT THIS ANSWER)
The socket fingers or pins in the socket are susceptible to mechanical damage
------
5.Which devices are hot plug on the PowerEdge SC1435?
The Power Edge 1435 has no hot plug devices
------
6. Which color denotes a touch point or removable devices on the PowerEdge 1950, 2950, 2900, 1900, 6950 and SC1435 that is not hot-pluggable?
blue
------
Which color denotes hot-plug devices on the PowerEdge 1950, 2950, 1900, 6950, and 2900?
7. Terra cotta / orange
------
8. Which video controller is integrated on the system board of the PowerEdge 1950, 2950, 2900, 1900, and 6950?
ES1000 ATI
------
9. Which network card is integrated on the PowerEdge 1950, 2950, 2900, 1900, and 6950?
Broadcom BCM5708
------
10. On the PowerEdge 1950, 2900, 2950, 1955, SC1435, 1900, and 6950 the system setup can be accessed by pressing F12 during POST.
FALSE - f12 to enter ssystem setup? = false
------
11. The PowerEdge 1950, 2900, 2950, SC1435, 1900,1955, and 6950 support booting to a USB flash drive.
TRUE - support booting to usb flash drive? = true
------
12. What is an invalid memory configuration in the PowerEdge 840 and 860?
256 MB DDR2 533 MHz unbuffered SDRAM DIMM
------
13. Which component is faulty if the PowerEdge 840 and 860 displays a yellow-yellow-green-yellow diagnostic LED code?
Processor (yello,yellow,green,yellow)
------
14. What LAN On Motherboard (LOM) adapter does the PowerEdge SC440 use?
Broadcom 5754 GbE PCI-Express
------
15. Which integrated SCSI controller is contained within the PowerEdge SC440?
None, the PowerEdge SC440does not have integrated SCSI controller
------
16. Which of the following components must be removed first from the PowerEdge SC440 before removing the system board?
Power supply
Computer cover
Power cord
Processor
------
17.Which of the following are required actions when removing the I/O panel on the PowerEdge SC440?
Move the sliding plate lever down towards the base of the computer.
Remove the computer cover.
Remove the three screws securing the front panel.
------
18. Which of the following expansion slots are available in the PowerEdge 2900?
PCI-e and PCI-x
-------
19. Rob reports that his PowerEdge 2900 will not POST. Rob says that he has no video on the screen, but the fans do appear to spin up on the system. What should you ask Rob to do to get more information about what may be causing the no POST issue?
A. Press and hold the ID button for 5 seconds to display the BIOS progress code on the LCD, and then reference this code against the LCD status messages reference found in the hardware owners manual.
------
Mike has a question about purchasing a PowerEdge 1950 configuration. Mike has one PCI-e adapter that he needs to put into each PowerEdge 1950 he purchases. Which riser option should you recommend to Mike?
PCI-X center riser and PCI-X left riser since PCI-e cards are backwards compatible with PCI-X.
--------
20. Henry is upset that he just received his PowerEdge 2950s, and all of the systems came with RapidRails. He says he ordered VersaRails because they are required for his installation. How should you handle this situation?
Ask Henry to get a set of the rails out of the box and explain to him how to convert them from RapidRails to VersaRails.
--------
21. When sparing is used, how much of the spare memory is reserved in the PowerEdge 1950, 2950, 1900, or 2900?
One rank per DIMM for DIMMs one through four
--------
xxxxxxxx (not sure)
How must DIMS be installed in the PowerEdge 1950, 2950 1900, or 2900?
DIMMs must be installed in matched pairs by branch
--------
!!!!!!! (im sure its the right answer)
Which PowerEdge 6950 BIOS setting must be disabled to allow Non-Uniform Memory Access?
Node Interleaving
--------
22. !!!!!!! (im sure its the right answer)
Which DIMMs are used for the spare memory in a memory sparing configuration in the PowerEdge 1950, 2950, 1900, or 2900?
Dimms one through four
--------
23.Why is it recommended to wait a period of time before removing the memory from a PowerEdge 1950, 2950, 1900, or 2900?
To allow the AMB time to cool down
--------
24. Which processor is supported in a PowerEdge 6950?
Optron 8212 standard
--------
25 Which PowerEdge 6950 and SC1435 BIOS setting must be enabled to allow the Power Now feature of the processors to function?
Demand-Based Power Management
--------
26 Which internal storage controllers are supported in the PowerEdge 6950.
PERC 5/i and SAS 5/iR
--------
27. What Processor configurations does the PowerEdge 6950 support?
2 or 4 processors
--------
28. Which processor is supported in a PowerEdge SC1435?
Optron 2212 standard
--------
29.Mike has one PCI-e adapter that he needs to put into each PowerEdge SC1435 he purchases. Which riser option should you recommend to Mike?
PCI-e riser
--------
30. Which types of internal drives are available on the PowerEdge SC1435?
SAS and SATA
--------
A customer asks you if he can plug a PowerEdge SC1435 into a 208 Volt power distribution unit. What would you tell the customer?
Yes, the PowerEdge SC1435 supports from 90 to 264 Volts AC.
--------
31. Tom has just purchased a PowerEdge SC1435 and is wondering if the x1 PCI-e NIC card he thinking of purchasing will work in his system. How would you answer this?
Yes, it will work, but it will slow the slot down to x1 speed
--------
32. alt + N
--------
33. When replacing a system board on the PowerEdge 1950, 2900, 2950, 1900, and 6950, what new device exists on this system board that must be moved/migrated to the replacement system board?
TOE Key
--------
34. Which keystroke(s) are used on BOOT to access the BIOS level interface to the PERC5/I on a PowerEdge 1950, 2900, 2950, SC1435, 1900, and 6950?
Ctrl + R
--------
Which keystroke(s) are needed to access the next page in the PERC5/i BIOS interface on a PowerEdge 1900?
Alt + N
--------
Mixing SAS and SATA drives is supported on the PowerEdge 1900.
False
--------
35. When installing a DRAC 5 into a PowerEdge 1900, How does it interface with the system?
Two management cables
--------
Which LED indicators are on the front panel of the PowerEdge SC440?
Hard drive activity indicator
Diagnostic indicators
Network link light
--------
36. What is the procedure for clearing NVRAM in the PowerEdge SC440?
Install a jumper on the RTCRST pins on the system board
--------
37. When configuring a PowerEdge SC440, which memory features are supported?
Unbuffered
ECC
--------
38.When using the SAS 5/IR, which RAID configurations are supported?
RAID 1
RAID 0
--------
39. If the cable for the Ambient Thermal diode sensor becomes disconnected, or the diode is damaged, what error is reported during boot?
Alert! Alert! Air temperature sensor not detected
REVIEW TEST1: = 87%
######################################################
1 Which PowerEdge SC1435 BIOS setting must be disabled to allow Non-Uniform Memory Access? Yes
2 In which section of the system setup of the PowerEdge 840, 860 and, SC1430 would you ensure that the diskette drive is the first boot device? Yes
3 Which RAID controller is supported in the PowerEdge SC1430? Yes
4 Why should you be careful while removing or installing a socket F processor? Yes
5 Which devices are hot plug on the PowerEdge SC1435? Yes
6 Which color denotes hot-plug devices on the PowerEdge 1950, 2950, 1900, 6950, and 2900? Yes
7 Which color denotes a touch point or removable devices on the PowerEdge 1950, 2950, 2900, 1900, 6950 and SC1435 that is not hot-pluggable? Yes
8 Which video controller is integrated on the system board of the PowerEdge 1950, 2950, 2900, 1900, and 6950? Yes
9 Multiple choice: Which network card is integrated on the PowerEdge 1950, 2950, 2900, 1900, and 6950? Yes
10 On the PowerEdge 1950, 2900, 2950, 1955, SC1435, 1900, and 6950 the system setup can be accessed by pressing F12 during POST. Yes
11 The PowerEdge 1950, 2900, 2950, SC1435, 1900,1955, and 6950 support booting to a USB flash drive. Yes
12 What is an invalid memory configuration in the PowerEdge 840 and 860? Yes
13 Which component is faulty if the PowerEdge 840 and 860 displays a yellow-yellow-green-yellow diagnostic LED code? Yes
14 What LAN On Motherboard (LOM) adapter does the PowerEdge SC440 use? Yes
15 Which integrated SCSI controller is contained within the PowerEdge SC440? Yes
16 Which of the following components must be removed first from the PowerEdge SC440 before removing the system board? Yes
17 Which of the following are required actions when removing the I/O panel on the PowerEdge SC440? Yes
18 Henry is upset that he just received his PowerEdge 2950s, and all of the systems came with RapidRails. He says he ordered VersaRails because they are required for his installation. How should you handle this situation? Yes
19 Mike has a question about purchasing a PowerEdge 1950 configuration. Mike has one PCI-e adapter that he needs to put into each PowerEdge 1950 he purchases. Which riser option should you recommend to Mike? Yes
20 Rob reports that his PowerEdge 2900 will not POST. Rob says that he has no video on the screen, but the fans do appear to spin up on the system. What should you ask Rob to do to get more information about what may be causing the no POST issue? Yes
21 How must DIMS be installed in the PowerEdge 1950, 2950 1900, or 2900? Yes
22 Which DIMMs are used for the spare memory in a memory sparing configuration in the PowerEdge 1950, 2950, 1900, or 2900? Yes
23 When sparing is used, how much of the spare memory is reserved in the PowerEdge 1950, 2950, 1900, or 2900? Yes
24 What Processor configurations does the PowerEdge 6950 support? Yes
25 Which PowerEdge 6950 BIOS setting must be disabled to allow Non-Uniform Memory Access? Yes
26 Which internal storage controllers are supported in the PowerEdge 6950. Yes
27 Which PowerEdge 6950 and SC1435 BIOS setting must be enabled to allow the Power Now feature of the processors to function? Yes
28 Tom has just purchased a PowerEdge SC1435 and is wondering if the x1 PCI-e NIC card he thinking of purchasing will work in his system. How would you answer this? Yes
29 Which processor is supported in a PowerEdge SC1435? Yes
30 A customer asks you if he can plug a PowerEdge SC1435 into a 208 Volt power distribution unit. What would you tell the customer? Yes
31 Mike has one PCI-e adapter that he needs to put into each PowerEdge SC1435 he purchases. Which riser option should you recommend to Mike? Yes
32 When replacing a system board on the PowerEdge 1950, 2900, 2950, 1900, and 6950, what new device exists on this system board that must be moved/migrated to the replacement system board? Yes
33 Which keystroke(s) are used on BOOT to access the BIOS level interface to the PERC5/I on a PowerEdge 1950, 2900, 2950, SC1435, 1900, and 6950? Yes
34 Mixing SAS and SATA drives is supported on the PowerEdge 1900. Yes
35 When installing a DRAC 5 into a PowerEdge 1900, How does it interface with the system? Yes
36 Which LED indicators are on the front panel of the PowerEdge SC440? Yes
37 When using the SAS 5/IR, which RAID configurations are supported? Yes
38 If the cable for the Ambient Thermal diode sensor becomes disconnected, or the diode is damaged, what error is reported during boot? Yes
39 When configuring a PowerEdge SC440, which memory features are supported?
######################################################
1. Which PowerEdge SC1435 BIOS setting must be disabled to allow Non-Uniform Memory Access?
Node Interleaving
------
2. In which section of the system setup of the PowerEdge 840, 860 and, SC1430 would you ensure that the diskette drive is the first boot device?
Boot Sequence
------
3. Which RAID controller is supported in the PowerEdge SC1430?
SAS 5/iR
------
4.Why should you be careful while removing or installing a socket F processor?
(NOT SURE ABOUT THIS ANSWER)
The socket fingers or pins in the socket are susceptible to mechanical damage
------
5.Which devices are hot plug on the PowerEdge SC1435?
The Power Edge 1435 has no hot plug devices
------
6. Which color denotes a touch point or removable devices on the PowerEdge 1950, 2950, 2900, 1900, 6950 and SC1435 that is not hot-pluggable?
blue
------
Which color denotes hot-plug devices on the PowerEdge 1950, 2950, 1900, 6950, and 2900?
7. Terra cotta / orange
------
8. Which video controller is integrated on the system board of the PowerEdge 1950, 2950, 2900, 1900, and 6950?
ES1000 ATI
------
9. Which network card is integrated on the PowerEdge 1950, 2950, 2900, 1900, and 6950?
Broadcom BCM5708
------
10. On the PowerEdge 1950, 2900, 2950, 1955, SC1435, 1900, and 6950 the system setup can be accessed by pressing F12 during POST.
FALSE - f12 to enter ssystem setup? = false
------
11. The PowerEdge 1950, 2900, 2950, SC1435, 1900,1955, and 6950 support booting to a USB flash drive.
TRUE - support booting to usb flash drive? = true
------
12. What is an invalid memory configuration in the PowerEdge 840 and 860?
256 MB DDR2 533 MHz unbuffered SDRAM DIMM
------
13. Which component is faulty if the PowerEdge 840 and 860 displays a yellow-yellow-green-yellow diagnostic LED code?
Processor (yello,yellow,green,yellow)
------
14. What LAN On Motherboard (LOM) adapter does the PowerEdge SC440 use?
Broadcom 5754 GbE PCI-Express
------
15. Which integrated SCSI controller is contained within the PowerEdge SC440?
None, the PowerEdge SC440does not have integrated SCSI controller
------
16. Which of the following components must be removed first from the PowerEdge SC440 before removing the system board?
Power supply
Computer cover
Power cord
Processor
------
17.Which of the following are required actions when removing the I/O panel on the PowerEdge SC440?
Move the sliding plate lever down towards the base of the computer.
Remove the computer cover.
Remove the three screws securing the front panel.
------
18. Which of the following expansion slots are available in the PowerEdge 2900?
PCI-e and PCI-x
-------
19. Rob reports that his PowerEdge 2900 will not POST. Rob says that he has no video on the screen, but the fans do appear to spin up on the system. What should you ask Rob to do to get more information about what may be causing the no POST issue?
A. Press and hold the ID button for 5 seconds to display the BIOS progress code on the LCD, and then reference this code against the LCD status messages reference found in the hardware owners manual.
------
Mike has a question about purchasing a PowerEdge 1950 configuration. Mike has one PCI-e adapter that he needs to put into each PowerEdge 1950 he purchases. Which riser option should you recommend to Mike?
PCI-X center riser and PCI-X left riser since PCI-e cards are backwards compatible with PCI-X.
--------
20. Henry is upset that he just received his PowerEdge 2950s, and all of the systems came with RapidRails. He says he ordered VersaRails because they are required for his installation. How should you handle this situation?
Ask Henry to get a set of the rails out of the box and explain to him how to convert them from RapidRails to VersaRails.
--------
21. When sparing is used, how much of the spare memory is reserved in the PowerEdge 1950, 2950, 1900, or 2900?
One rank per DIMM for DIMMs one through four
--------
xxxxxxxx (not sure)
How must DIMS be installed in the PowerEdge 1950, 2950 1900, or 2900?
DIMMs must be installed in matched pairs by branch
--------
!!!!!!! (im sure its the right answer)
Which PowerEdge 6950 BIOS setting must be disabled to allow Non-Uniform Memory Access?
Node Interleaving
--------
22. !!!!!!! (im sure its the right answer)
Which DIMMs are used for the spare memory in a memory sparing configuration in the PowerEdge 1950, 2950, 1900, or 2900?
Dimms one through four
--------
23.Why is it recommended to wait a period of time before removing the memory from a PowerEdge 1950, 2950, 1900, or 2900?
To allow the AMB time to cool down
--------
24. Which processor is supported in a PowerEdge 6950?
Optron 8212 standard
--------
25 Which PowerEdge 6950 and SC1435 BIOS setting must be enabled to allow the Power Now feature of the processors to function?
Demand-Based Power Management
--------
26 Which internal storage controllers are supported in the PowerEdge 6950.
PERC 5/i and SAS 5/iR
--------
27. What Processor configurations does the PowerEdge 6950 support?
2 or 4 processors
--------
28. Which processor is supported in a PowerEdge SC1435?
Optron 2212 standard
--------
29.Mike has one PCI-e adapter that he needs to put into each PowerEdge SC1435 he purchases. Which riser option should you recommend to Mike?
PCI-e riser
--------
30. Which types of internal drives are available on the PowerEdge SC1435?
SAS and SATA
--------
A customer asks you if he can plug a PowerEdge SC1435 into a 208 Volt power distribution unit. What would you tell the customer?
Yes, the PowerEdge SC1435 supports from 90 to 264 Volts AC.
--------
31. Tom has just purchased a PowerEdge SC1435 and is wondering if the x1 PCI-e NIC card he thinking of purchasing will work in his system. How would you answer this?
Yes, it will work, but it will slow the slot down to x1 speed
--------
32. alt + N
--------
33. When replacing a system board on the PowerEdge 1950, 2900, 2950, 1900, and 6950, what new device exists on this system board that must be moved/migrated to the replacement system board?
TOE Key
--------
34. Which keystroke(s) are used on BOOT to access the BIOS level interface to the PERC5/I on a PowerEdge 1950, 2900, 2950, SC1435, 1900, and 6950?
Ctrl + R
--------
Which keystroke(s) are needed to access the next page in the PERC5/i BIOS interface on a PowerEdge 1900?
Alt + N
--------
Mixing SAS and SATA drives is supported on the PowerEdge 1900.
False
--------
35. When installing a DRAC 5 into a PowerEdge 1900, How does it interface with the system?
Two management cables
--------
Which LED indicators are on the front panel of the PowerEdge SC440?
Hard drive activity indicator
Diagnostic indicators
Network link light
--------
36. What is the procedure for clearing NVRAM in the PowerEdge SC440?
Install a jumper on the RTCRST pins on the system board
--------
37. When configuring a PowerEdge SC440, which memory features are supported?
Unbuffered
ECC
--------
38.When using the SAS 5/IR, which RAID configurations are supported?
RAID 1
RAID 0
--------
39. If the cable for the Ambient Thermal diode sensor becomes disconnected, or the diode is damaged, what error is reported during boot?
Alert! Alert! Air temperature sensor not detected
REVIEW TEST1: = 87%
######################################################
1 Which PowerEdge SC1435 BIOS setting must be disabled to allow Non-Uniform Memory Access? Yes
2 In which section of the system setup of the PowerEdge 840, 860 and, SC1430 would you ensure that the diskette drive is the first boot device? Yes
3 Which RAID controller is supported in the PowerEdge SC1430? Yes
4 Why should you be careful while removing or installing a socket F processor? Yes
5 Which devices are hot plug on the PowerEdge SC1435? Yes
6 Which color denotes hot-plug devices on the PowerEdge 1950, 2950, 1900, 6950, and 2900? Yes
7 Which color denotes a touch point or removable devices on the PowerEdge 1950, 2950, 2900, 1900, 6950 and SC1435 that is not hot-pluggable? Yes
8 Which video controller is integrated on the system board of the PowerEdge 1950, 2950, 2900, 1900, and 6950? Yes
9 Multiple choice: Which network card is integrated on the PowerEdge 1950, 2950, 2900, 1900, and 6950? Yes
10 On the PowerEdge 1950, 2900, 2950, 1955, SC1435, 1900, and 6950 the system setup can be accessed by pressing F12 during POST. Yes
11 The PowerEdge 1950, 2900, 2950, SC1435, 1900,1955, and 6950 support booting to a USB flash drive. Yes
12 What is an invalid memory configuration in the PowerEdge 840 and 860? Yes
13 Which component is faulty if the PowerEdge 840 and 860 displays a yellow-yellow-green-yellow diagnostic LED code? Yes
14 What LAN On Motherboard (LOM) adapter does the PowerEdge SC440 use? Yes
15 Which integrated SCSI controller is contained within the PowerEdge SC440? Yes
16 Which of the following components must be removed first from the PowerEdge SC440 before removing the system board? Yes
17 Which of the following are required actions when removing the I/O panel on the PowerEdge SC440? Yes
18 Henry is upset that he just received his PowerEdge 2950s, and all of the systems came with RapidRails. He says he ordered VersaRails because they are required for his installation. How should you handle this situation? Yes
19 Mike has a question about purchasing a PowerEdge 1950 configuration. Mike has one PCI-e adapter that he needs to put into each PowerEdge 1950 he purchases. Which riser option should you recommend to Mike? Yes
20 Rob reports that his PowerEdge 2900 will not POST. Rob says that he has no video on the screen, but the fans do appear to spin up on the system. What should you ask Rob to do to get more information about what may be causing the no POST issue? Yes
21 How must DIMS be installed in the PowerEdge 1950, 2950 1900, or 2900? Yes
22 Which DIMMs are used for the spare memory in a memory sparing configuration in the PowerEdge 1950, 2950, 1900, or 2900? Yes
23 When sparing is used, how much of the spare memory is reserved in the PowerEdge 1950, 2950, 1900, or 2900? Yes
24 What Processor configurations does the PowerEdge 6950 support? Yes
25 Which PowerEdge 6950 BIOS setting must be disabled to allow Non-Uniform Memory Access? Yes
26 Which internal storage controllers are supported in the PowerEdge 6950. Yes
27 Which PowerEdge 6950 and SC1435 BIOS setting must be enabled to allow the Power Now feature of the processors to function? Yes
28 Tom has just purchased a PowerEdge SC1435 and is wondering if the x1 PCI-e NIC card he thinking of purchasing will work in his system. How would you answer this? Yes
29 Which processor is supported in a PowerEdge SC1435? Yes
30 A customer asks you if he can plug a PowerEdge SC1435 into a 208 Volt power distribution unit. What would you tell the customer? Yes
31 Mike has one PCI-e adapter that he needs to put into each PowerEdge SC1435 he purchases. Which riser option should you recommend to Mike? Yes
32 When replacing a system board on the PowerEdge 1950, 2900, 2950, 1900, and 6950, what new device exists on this system board that must be moved/migrated to the replacement system board? Yes
33 Which keystroke(s) are used on BOOT to access the BIOS level interface to the PERC5/I on a PowerEdge 1950, 2900, 2950, SC1435, 1900, and 6950? Yes
34 Mixing SAS and SATA drives is supported on the PowerEdge 1900. Yes
35 When installing a DRAC 5 into a PowerEdge 1900, How does it interface with the system? Yes
36 Which LED indicators are on the front panel of the PowerEdge SC440? Yes
37 When using the SAS 5/IR, which RAID configurations are supported? Yes
38 If the cable for the Ambient Thermal diode sensor becomes disconnected, or the diode is damaged, what error is reported during boot? Yes
39 When configuring a PowerEdge SC440, which memory features are supported?
######################################################
mike Wed Apr 24, 2013
please email me if you have storage powervault 110t
HOA Sat Nov 12, 2011
i need anwers ESF 2011.
Thanks
Thanks
BC Fri Mar 22, 2013
Hello. Did you find out the answers fosr ESF 2001 L1, and if so coul you send them to me?
thank you!
jax_zman - at - Yahoo!
thank you!
jax_zman - at - Yahoo!
Arack Tue May 08, 2012
Arack Yhoey
81charly Thu Apr 26, 2012
HELP ME!!!!! correct answer please
• Enterprise: Associate Server V10 (Cert ID: 821)
• ESF2011 L1 (Cert ID: 3036)
• Enterprise: Associate Server V10 (Cert ID: 821)
• ESF2011 L1 (Cert ID: 3036)
dustyn Mon Mar 12, 2012
DCSE ESF 2011 L1 (Cert ID: 3036).
hase anyone answers? send please velgilmi - at - hotmail.-com-
hase anyone answers? send please velgilmi - at - hotmail.-com-
Maria Fri Feb 24, 2012
please i need answer associate server certificstion V8.5
Luciano Mon Feb 20, 2012
Please i need DCSE Associate Server Certification V10.0,
DCSE ESF 2011 L1 (Cert ID: 3036).
answers?
DCSE ESF 2011 L1 (Cert ID: 3036).
answers?
Nick Wed Jan 25, 2012
DCSE Associate Server Certification V10.0,
DCSE ESF 2011 L1 (Cert ID: 3036).
hase anyone answers? send please Samsunick - at - gala.
DCSE ESF 2011 L1 (Cert ID: 3036).
hase anyone answers? send please Samsunick - at - gala.
shano223 Fri Nov 04, 2011
Hi just wondering if you are after getting the q/a for the dell esf 2011 l1.If so you might get back to me as I need to get this exam done ASAP. And I can give you my email
LKom Mon Oct 24, 2011
DCSE Associate Server Certification V10.0,
DCSE ESF 2011 L1 (Cert ID: 3036).
answers?
DCSE ESF 2011 L1 (Cert ID: 3036).
answers?
LKom Thu Sep 29, 2011
i need to DCSE ESF 2011 L1 and Associate Server Certification V10.0 maybe some have Q&A . Please send to EMAil _._ - at - _mail_._ru THANKS
The Mon Sep 26, 2011
PCI-X and PCI-e backwards compatible NOT! Who fed you that?
PCI-X is a parallel standard of PCI with sometimes a wider bus and/or higher clock speed depending on the version. PCI-e is serial communications with various versions having multiple serial lines to communicate. Thus PCI-X and PCI-e are NOT interchangeable and in fact PCI-X cards are longer and will not even fit in the slots. So Mike, did Dell mark this one wrong? PCI-X is backwards compatible with older PCI down to version 2
PCI-X is a parallel standard of PCI with sometimes a wider bus and/or higher clock speed depending on the version. PCI-e is serial communications with various versions having multiple serial lines to communicate. Thus PCI-X and PCI-e are NOT interchangeable and in fact PCI-X cards are longer and will not even fit in the slots. So Mike, did Dell mark this one wrong? PCI-X is backwards compatible with older PCI down to version 2
KoWee Thu Sep 15, 2011
If anybody have the questions and asnwers for ESF 2011 L1, can send it to me? I have all the previous exams from gen7, but this one is harder than i expecting. Tried 2 times, always fail with 5-6% :(
Thx guys.
Thx guys.
Eldo Wed Aug 17, 2011
i have dcsc portables dumps with me.can some one sent me dell ESF 2011 L1 dumps and DCSE Associate Server Certification V10.0 dumps
dnb Fri Aug 12, 2011
please send me q&a ESF2011 to dnb.lsr at gmail dot com :)
Related Content
Information
Forums »
General Forums And Topics Discussions About Anything Wallpapers Sites »
Questions And Answers For Dell Server Test Exam
General Forums And Topics Discussions About Anything Wallpapers Sites »
Questions And Answers For Dell Server Test Exam
Title: Questions And Answers For Dell Server Test Exam
Description: Questions And Answers For Dell Server Test Exam
Tags: questions ,and ,answers ,for ,dell ,server ,test ,exam
Info: This Post Has Been Viewed 0 Times Since
Date: Sun Jun 15, 2008
Author luke_1990 Received 53 Replies #2223
Date: Sun Jun 15, 2008
Author luke_1990 Received 53 Replies #2223
Share
URL: 
Embed:
To embed this topic, just copy the code from the "Embed" box. Once you've copied the code, just paste it into your website or blog to embed it
BBCODE::
BBCODE is use on forums. You can put this code on all your BBCODE enabled forums like PhpBB, vBulletin® and others. Just Copy and Paste this code on your Posts and Replies on your forums
wallpaperama | Wallpapers | Forums | Terms Of Service
copyright © 2013 wallpaperama - All Rights Reserved - Last Updated Mon May 06, 2013 (-8 GMT)
Powered by: Webune Forums V5
copyright © 2013 wallpaperama - All Rights Reserved - Last Updated Mon May 06, 2013 (-8 GMT)
Powered by: Webune Forums V5